4- Soft Starters
Soft starter two-phase microprocessor-controlled control for optimized soft start. Reduction of the peak current and the torque stroke in the acceleration with integrated bypass relay. Parameter setting using three potentiometers: acceleration time, starting voltage and deceleration time. It does not require additional control voltage nor does it need neutral. Potential-free control input for soft acceleration and deceleration. Economical substitute for star-delta starters. Easy mounting on DIN rail and compact design. Degree of protection IP20. For other powers consult.
AS4000301
Soft starter 1,5kW 3,5A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x110x121mm.
AS4000601
Soft starter 3kW 6,5A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x110x121mm.
AS4001201
Soft starter 5,5kW 12A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x110x121mm.
AS4001601
Soft starter 7,5kW 16A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x110x121mm.
AS4001602
Soft starter 7,5kW 17A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x173x158mm.
AS4002501
Soft starter 11kW 25A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x173x158mm.
AS4003201
Soft starter 15kW 32A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 45x173x158mm.
AS4004501
Soft starter 22kW 45A 400V III.
Two phase control.
Easy mounting on DIN rail.
Parameter setting with 3 potentiometers.
Status relay stop/run.
Dimensions: 52,5x178x158mm.